Home >

Principles And Matters Needing Attention When Materials Are Placed

2008/8/12 10:45:00 41793

Attention should be paid to the following problems when placing materials on the table.

1. avoid packing items directly onto the stage.

2. choose the appropriate box and bracket, place the material on the support box or bracket, and the large material is small with large and small materials.

3. when two different sizes of materials are placed together, the small pieces of material are placed in front of the hand, and the large ones are placed on the outside side.

4. do not put similar materials together.

Especially when the materials that are difficult to distinguish from the outside are placed together, it is very easy to use the wrong way.

5. support box and supporting platform visualization.

Write the name and number of the material on the sticker, then paste it on the supporting box and carrying box, so that others can confirm it.

6. any articles that are irrelevant to the work shall not be placed on the table, especially personal belongings.

7. supporting box and supporting platform for stabilization.

The supporting boxes are linked to each other, which can effectively increase the stability of taking and taking off, and save table space.

8. materials are placed in a fan and create ladder space.

The fan is placed in line with the best moving range of the human arm. When it is taken back and forth, it is not easy to produce fatigue.

9. clean up the bad materials temporarily on the table in time and prevent the bad from staying overnight on the operation table.

10. times the same amount of material input.

Do not put all the materials needed on the same day at once, making the table material too much and nowhere to be placed.

11. make full use of inclined pallet to lay material.

  • Related reading

Introduction To Leather Shoes Craft Knowledge

Shoemaking technology
|
2008/8/12 10:43:00
41786

How To Determine The Upper Theoretical Data In The Shoe Upper Design?

Shoemaking technology
|
2008/8/12 10:42:00
41798

Several Key Factors Affecting The Selection Of Shoemaking Process

Shoemaking technology
|
2008/8/11 10:10:00
41756

How To Solve The Dent On The Side Wall Of Injection Molded Parts

Shoemaking technology
|
2008/8/9 10:29:00
41757

Application Of Polyester Plasticizer In PVC Plastic Products

Shoemaking technology
|
2008/8/9 10:27:00
41758
Read the next article

Knowledge Of Roller Skates For Footwear Families

Most of the shoes of speed boot are made of fiberglass or carbon fiber, mainly to reduce weight and provide good support (ankle support). Besides supporting, it needs flexibility, so the design of speed shoes is the lowest among all kinds of skates.